Engineering Calculations That Protect Your Project
We use these calculations to:
Design justifications and soil reinforcement solutions using the PolyJet FT® technology undergo thorough review, helping to reduce risks and optimize construction budgets.
At GeotechSynthesis, engineering calculations are not offered as a standalone service—they are an integral part of our solutions for soil injection strengthening, stabilization, and sealing.
At GeotechSynthesis, engineering calculations are not offered as a standalone service—they are an integral part of our solutions for soil injection strengthening, stabilization, and sealing.
Submit a request to obtain a structural calculation justification
We will contact you within one hour
Validate the applicability of injection technologies
Quantify the expected effectiveness of soil grouting
Minimize engineering and operational risks
Support design decisions and provide documentation for regulatory review
Engineering Calculations We Provide
Calculations are performed to confirm the feasibility and effectiveness of soil and foundation strengthening using injection methods.
We carry out:
We carry out:
- Analysis of initial soil and foundation conditions (pre-injection)
- Calculation of foundation bearing capacity before strengthening
- Prediction of settlements and deformations prior to reinforcement
- Identification of causes for exceeding allowable deformations
- Determination of required improvement in soil parameters (modulus of elasticity, strength characteristics)
- Forecast of settlements and deformations after injection-based strengthening
- Verification of compliance with regulatory standards (PS-1 and PS-2)
Calculations are applied when the goal is to halt or limit deformation progression rather than merely increase foundation strength.
We perform:
We perform:
- Calculation of total and differential settlements
- Analysis of tilts and rotations of structures
- Monitoring deformation development over time
- Assessment of effects of soil loosening, voids, cavities, and suffosion
- Prediction of settlement stabilization after injection interventions
- Verification of deformation compliance with allowable limits
Calculations are performed for soil mass sealing, reducing water filtration, and preventing suffosion and erosion.
We conduct:
We conduct:
- Calculation of pre-injection filtration flows
- Assessment of filtration gradients and suffosion risks
- Determination of required reduction in soil permeability
- Evaluation of effectiveness of anti-filtration (injection) barriers
- Assessment of sealing impact on stability and deformations of the foundation
- Forecast of soil mass behavior after creating anti-filtration barriers
We carry out calculations for conditions such as:
- Saturated or weak soils
- Heterogeneous or layered foundations
- Existing and operational structures
- High-risk or Category I structures
- Situations where conventional strengthening methods are inadequate or excessive
Within the framework of injection solutions, we provide:
- Adjustment of calculation schemes considering soil property changes after injections
- Checks according to PS-1 and PS-2, accounting for injection effects
- Preparation of calculation justifications for designers
- Support and responses to expert review comments
- Defense of the engineering rationale behind chosen solutions
When Engineering Calculations Are Required
Calculations are necessary when:
- Settlements or deformations exceed allowable limits
- Verification of the effectiveness of an injection-based solution is required
- The structure belongs to a high-risk or critical category
- Conventional methods need to be replaced with injection techniques
- Documentation and justification are needed for regulatory or expert review
Deliverables for the Client
Upon completion, the client receives:
- Engineering verification of the applicability of the injection solution
- Forecast of foundation or soil mass behavior before and after injection
- Design justification for strengthening, stabilization, or sealing in a formal calculation format
- Supporting documentation for design and regulatory review, if required
GeotechSintez — the manufacturer of materials and developer of technologies for soil stabilization and geotechnical solutions.
We create geotechnical solutions where traditional methods are ineffective or uneconomical by combining a scientific and technical approach with practical experience. Thanks to our unique expertise, comprehensive range of modern technologies, and dedicated service, our experts have successfully solved over 100 geotechnical tasks, including highly critical projects and those in harsh climatic conditions.
We create geotechnical solutions where traditional methods are ineffective or uneconomical by combining a scientific and technical approach with practical experience. Thanks to our unique expertise, comprehensive range of modern technologies, and dedicated service, our experts have successfully solved over 100 geotechnical tasks, including highly critical projects and those in harsh climatic conditions.
More than 100 projects completed by company experts
100+
Over 200 satisfied clients
200+
Over 40 years of combined expertise
40+
About Us
Project Workflow
Request Submission
You send us a request describing your problem or project needs.
1
Site Assessment & Analysis
We analyze the task, inspect the site, and perform any necessary surveys or investigations.
2
Engineering Solution & Design
We develop a technical solution, perform calculations, and prepare design documentation.
3
Certified Contractors Engagement
We invite certified professionals to carry out the work.
4
Delivery of Materials & Equipment
We supply all required materials and equipment to the site.
5
Project Supervision & Quality Control
We supervise the execution of the work and ensure quality control at every stage.
6